3d Modelling evidence – Fighter ship

Screen Shot 2015-03-23 at 10.22.20Screen Shot 2015-03-23 at 13.58.54 Screen Shot 2015-03-23 at 13.59.09


Screen Shot 2015-03-23 at 14.00.43 Screen Shot 2015-03-23 at 14.05.31

Screen Shot 2015-03-23 at 14.03.27       Screen Shot 2015-03-23 at 14.35.27

Above are the stills ive taken during the process of creating my ‘FIGHTER SHIP’ it was a long process.

I started with a simple cube.

Screen Shot 2015-03-27 at 09.58.28

During this process I began to extrude faces more than re shaping

Screen Shot 2015-03-27 at 09.59.04

I began looking at the wing shape I was going to use and chose to base it on A hollow tube.
The gaps in my wings on the finished piece were in my mind going to work better than full ones, as the wind&air can fly through the gaps giving the ship more flight time.

Screen Shot 2015-03-27 at 10.02.12

These were created by manipulating ‘planes’ and added cubes, I was very happy with how these turned out (see video below)

Screen Shot 2015-03-27 at 10.03.32

The next part i found difficult to create was the nose of the ship, Although it looks very square it was created using spheres and  the ‘bool’ tool
(photo sequence below)
Screen Shot 2015-03-27 at 10.03.32 Screen Shot 2015-03-27 at 10.05.08
As this process began It was more along the lines of manipulating the shapes and extruding the faces in order to get the shape desired

As my ship was mainly based on cubes I had found that you can actually create alot of different shapes out of a standard cube.

(Back of the ship)
Screen Shot 2015-03-27 at 10.07.51
(here shows the prominent  use of cubes)

(See video below for jets)

Screen Shot 2015-03-27 at 10.03.32