Above are the stills ive taken during the process of creating my ‘FIGHTER SHIP’ it was a long process.
I started with a simple cube.
During this process I began to extrude faces more than re shaping
I began looking at the wing shape I was going to use and chose to base it on A hollow tube.
The gaps in my wings on the finished piece were in my mind going to work better than full ones, as the wind&air can fly through the gaps giving the ship more flight time.
These were created by manipulating ‘planes’ and added cubes, I was very happy with how these turned out (see video below)
The next part i found difficult to create was the nose of the ship, Although it looks very square it was created using spheres and the ‘bool’ tool
(photo sequence below)
As this process began It was more along the lines of manipulating the shapes and extruding the faces in order to get the shape desired
As my ship was mainly based on cubes I had found that you can actually create alot of different shapes out of a standard cube.
(Back of the ship)
(here shows the prominent use of cubes)
(See video below for jets)